Search

Deepwater

WWT NRPs Protectors Provide Casing Protection at Sidetrack

A Gulf of Mexico well required 14’’ casing protection at an 8°/100ft sidetrack. WWT installed 378 HD-SS3-658-slim model NRPs at 2 per joint due to excessive side force. The slim version was necessary for RCD compatibility, stripping NRPs out of hole with 350 psi backpressure. Due to excessive tar, a bypass section was also drilled and TD of 29,850 ft was successfully reached. Approximately 50 NRPs went into the open hole salt formation to protect the sidetrack point throughout both bit runs.

PROTECTED CASING ON A DEEPWATER WELL WITH MPD

A deepwater offshore well had a shallow dogleg and build that resulted in needing casing protection. 
WWT installed 576 SS3-658-slim model NRPs. The slim version was necessary for RCD compatibility. 
MPD was used with 330 psi backpressure. 

Torque Reduction and Casing Protection in Unstable Hole Conditions

NRPs reduce Torque and protect the casing despite cavings and unstable hole conditions. Operations included milling window and several cement plugs in addition to drilling sidetracks where NRPs reduced torque by 13%.

WWT NRPs Reduce Drilling Torque to Stay Below Limit

WWT NRPs were deployed to reduce torque and prevent heat checking while drilling an S-shaped well in the Gulf of Mexico.

WWT NRPs Replace Steel Protectors in GoM Well

After experiencing slipping and detachment issues with a competitor’s clamp-on steel protectors in a previous section, WWT’s Non-Rotating Protectors (NRPs) were deployed for the 12-1/4” section in conjunction with the competitor’s sub-type steel protectors as a solution to mitigate casing wear and reduce torque

WWT NRPS SMOOTH & REDUCE DRAG THROUGH BUCKLED CASING

A deepwater offshore well had a highly deviated and buckled production casing throughout most of the 
wellbore. The contact from pipe to casing resulted in high drag and made completion operations difficult 
due to high set down weight volatility. WWT installed 594 SS3 model NRPs.

Casing Protection and Heat Checking Prevention due to Non-Rotating Protectors

Location: Gulf of Mexico
Well Type: Deepwater
Objective: Reduce Casing Wear and Heat Checking
Solution: WWT SS-658 NRPs
Results: Mitigated Casing Wear Shown in Log Results

Complete Riser Protection without POOH on a Series of Offshore Wells– Africa

Location: Africa
Well Type: Directional
Objective: Riser protection without POOH
Solution: WWT NRPs in open hole
Results: Riser protected throughout each well in one bit run to TD

Non-Rotating Protectors Allow Drilling Ahead with High Riser Deflection

Location: North America
Well Type: Deepwater
Objective: Riser Protection
Solution: WWT SS‐658‐SC NRPs
Results: 43 hours saved while drilling

GOM Operator Preserves Casing in Deepwater Development Wells

Location: USA Gulf of Mexico
Well Type: Deepwater directional
Objective: Casing Protection and torque reduction
Solution: WWT SS NRPs across KOP
Results: Casing protection, 25% torque Reduction, and additional side tracks

WWT FlexShoe helps 16” Casing Get to Bottom in Deepwater GOM

Location: Gulf of Mexico
Well Type: Deepwater
Objective: Run 16” Casing in High Inclination Wellbore
Solution: WWT FlexShoe
Results: Casing run to bottom.

WWT FlexShoe helps 18” Casing Reach Bottom Efficiently

Location: Gulf of Mexico
Well Type: Deepwater
Objective: Run 18” Casing in High Inclination Wellbore
Solution: WWT FlexShoe
Results: Casing run to bottom with no significant drag.

.